Details
1395 PYREX® Laboratory Storage Bottles
Heavy duty PYREX bottles are made from 7740 glass, a chemically resistant, low expansion, borosilicate glass, and can be used for storage, mixing and sampling. Each bottle Includes a liner-less, one-piece, orange, autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Glass bead indicates full capacity line on 100 mL through 2 liter size. Bottles have permanent white enamel graduations and marking spots. Color-coded polypropylene caps in a choice of orange, green, purple, red and light gray are available.
A wide range of optional closures are available for the bottles including:
- Plug seal, GL45 color-coded caps to aid in sorting and identification
- High temperature, GL45 or GL32 PBT caps (Polybutylene-teraphthalate ) with PTFE (Polytetrafluoroethylene) coated liners (Cat. No. 1395-45HTC), ETFE (Ethylenetetrafluoroethylene) copolymer rings (Cat. No. 1395-45HTR), and Silicone septa (Cat. No. 1395-45SS) are suitable for dry heat sterilization (180°C).
- Vented, GL45 caps with 0.22 µm PTFE hydrophobic membranes(Cat. No. 1395-45LTMC)
- Open Top, PBT caps in GL25, GL32, and GL45 sizes
- Silicone or PTFE-faced Silicone Septa for the open-top caps.
Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as breakage may occur. DO NOT have caps tightened immediately after autoclaving, as the vacuum resulting from cooling can cause breakage. A pouring ring is not included on 25 mL size. A vented cap is NOT recommended for use on the 5L and 10L 1395 series bottle.